![]() ![]() ![]() See example >.įor simplest setup you need only ovpn server certificate.įirst step is to create ip pool from which client addresses will be assigned and some users Value other than "connected" indicates that there are some problems establishing tunnel.Įlapsed time since tunnel was established.Įlapsed time since last activity on the tunnel.Īssume that Office public IP address is 2.2.2.2 and we want two remote OVPN clients to have access to 10.5.8.20 and 192.168.55.0/24 networks behind office gateway.Īll certificates can be created on RouterOS server using certificate manager. Monitor command can be used to monitor the status of the tunnel on both client and /interface ovpn-server monitor 0Ĭurrent status. To overcome any certificate verification problems, enable NTP date synchronization on both server and client. It is very important that the date on the router is within the range of the installed certificate's date of expiration. If set to yes, then server checks whether client's certificate belongs to the same certificate /interface ovpn-server server set /interface ovpn-server server set /interface ovpn-server server print Require-client-certificate ( yes | no Default: no) ![]() 2 * keepalive-timeout), not responding client is proclaimed disconnectedĪuto Generated MAC address of the server. If no traffic and no keepalive responses has came for that period of time (i.e. Keepalive-timeout ( integer | disabled Default: 60)ĭefines the time period (in seconds) after which the router is starting to send keepalive packets every second. Name of the certificate that OVPN server will use.Ĭipher ( aes128 | aes192 | aes256 | blowfish128 Default: aes128,blowfish128)ĭefault-profile ( name Default: default)ĭefines whether OVPN server is enabled or not. Note: in both cases PPP users must be configured properly - static entries do not replace PPP configuration.Īuthentication methods that server will accept.Ĭertificate ( name | none Default: none) Otherwise it is safe to use dynamic configuration.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |